Rm B1145

Photo of Room B1145
Photo of Room B1145

Room B1145 is located in the HF DeLuca Biochemistry Building (420 Henry Mall) and has the following capabilities/equipment:

  • Capacity: 10
  • Lighting
  • Projector
    • AppleTV
    • HDMI input
  • Projector screen
  • Speakers
  • Whiteboard

Reservation Calendar – Note: You can also access the room reservation calendar by tapping the NFC icon or scanning the QR code on the room sign outside the room.

Reservation Information

Lighting

There are two light switches near the entrance to the room.  The left switch provides approximately 60% lighting. The right switch provides approximately 40% lighting.

Please make sure all lights are off when you leave the room.

Projector

A projector is available.  The projector is controlled by the panel located in the northwest corner of the room.  To turn the projector on and lower the screen, press the “ON” button. Pressing the “OFF” button will turn the projector off and raise the screen.

Please make sure the projector is turned off when you are done.

This is an accordion element with a series of buttons that open and close related content panels.

AppleTV Instructions

The AppleTV allows wireless connection from most Apple devices via AirPlay.  Apple provides AirPlay instructions that provide information to initiate a connection for macOS, iPhone, iPad, and iPod devices. You will want to connect to BIOC-Rm B1145-1602 in this room.

  1. Make sure the projector is “ON” and “APPLE TV” is selected on the control panel.
  2. You can then initiate a connection to the AppleTV from your device using the instructions provided by Apple above.

You will be prompted to enter a 4-digit security code to ensure you are connecting to the correct device and prevent unauthorized connections.

Once connected you can adjust display resolution, screen mirroring or extended display, etc. as desired from the relevant System Preferences/Settings.

HDMI Instructions

This connection is located on the wall plate below the projector control panel.

An HDMI cable is provided for use with the projector.

  1. Connect the HDMI cable to your laptop or device.
  2. Make sure the projector is “ON” and “HDMI 1” is selected on the control panel.

Once connected you can adjust display resolution, screen mirroring or extended display, etc. as desired from the relevant System Preferences/Settings.

Speakers

The volume dial controls the volume of the audio playing through the speakers in the room. The speakers will play any audio provided by one of the inputs available in for the projector.

You can mute the audio by pressing the “Audio Mute” button.  Press the button again to turn the sound back on.

Assistance

If you need immediate assistance please try the following phone numbers:

Biochem IT – 608-265-4695
BMC IT – 608-262-1184
Biochemistry Front Desk – 608-262-3040

To report an equipment issue or for other concerns, please submit a ticket to the Biochemistry Job Board.