Rm 348

Room 348 is located in the HF DeLuca Biochemistry Labs Building (433 Babcock Drive) and has the following capabilities/equipment:

  • Capacity: 20 (table seats 8-10)
  • 65″ Sony Display
    • AppleTV wireless input
    • HDMI input
  • Projector screen
  • Multiple Whiteboards
  • Variable Lighting
  • Sink

Reservation Calendar – Note: You can also access the room reservation calendar by tapping the NFC icon or scanning the QR code on the room sign outside the room.

Reservation Information

Display

A 65″ Sony display is available behind the sliding whiteboards. The display offers two inputs, AppleTV and HDMI.

Please make sure the display is turned off when you are done.

This is an accordion element with a series of buttons that open and close related content panels.

AppleTV Instructions

The AppleTV allows wireless connection from most Apple devices via AirPlay.  Apple provides AirPlay instructions that provide information to initiate a connection for macOS, iPhone, iPad, and iPod devices. You will want to connect to BIOC-Rm 348-1589 in this room.

Initiating a connection from your device should automatically turn the display on and configure it to the correct input. If the display doesn’t automatically power on, you can use the remote to turn it on and select input BIOC-Rm 348-1589. There is also a physical power/select button on the bottom of the display near the Sony logo. You can press this button to turn the display on. Once the display is on you can use the button to navigate through options such as power and input by clicking the button, or make selections by holding the button (example: click until Power is highlighted, then hold the button to turn the display off).

You will be prompted to enter a 4-digit security code to ensure you are connecting to the correct device and prevent unauthorized connections.

Once connected you can adjust display resolution, screen mirroring or extended display, etc. as desired from the relevant System Preferences/Settings.

HDMI Cable Instructions

An HDMI cable is available in the left cabinet below the display.

Use the remote to turn the TV on. If the input is not automatically selected, you can press the TV button on the remote to switch to HDMI Cable. There is also a physical power/select button on the bottom of the display near the Sony logo. You can press this button to turn the display on. Once the display is on you can use the button to navigate through options such as power and input by clicking the button, or make selections by holding the button (example: click until Power is highlighted, then hold the button to turn the display off).

Once connected you can adjust display resolution, screen mirroring or extended display, etc. as desired from the relevant System Preferences/Settings.

Please be sure to neatly return the cable to the cabinet when you are done.

Lighting

The lighting control panel offers five lighting levels.

  • Top Button – Full Lighting – Activates all programmable lights in the room – 10 second delay to allow eyes to adjust
  • Second Button – 50% Lighting – Dims lighting to approximately 50% – 5 second delay to allow eyes to adjust
  • Third Button – 30% Lighting – Dims lighting to approximately 30% – 5 second delay to allow eyes to adjust
  • Fourth Button – 50% Table Lights Only – This option only uses lights directly over the tables and dims them to approximately 50% – 5 second delay to allow eyes to adjust
  • Off – 10 second delay to allow eyes to adjust

There is also a light switch near the sink that turns on two additional lights located over the countertop for additional lighting options.

Please make sure all lights are off when you leave the room.

Assistance

If you need immediate assistance please try the following phone numbers:

Biochem IT – 608-265-4695
Biochemistry Front Desk – 608-262-3040

To report an equipment issue or for other concerns, please submit a ticket to the Biochemistry Job Board.